Home › Blog › HOCl for Restaurants: Cleaning Workflows and Limits

HOCl for Restaurants: Cleaning Workflows and Limits

HOCl for restaurants: how the EWCO 300 or Hypo 7.5 can fit a cleaning workflow, what to confirm first, and what on-site HOCl doesn't replace.

By HOCL LLC · Published

Empty, clean restaurant prep area with stainless tables, a prep sink and color-coded cutting boards stored in a rack
Illustration: generated editorial image.

This page is a planning checklist, not an approved cleaning protocol. It does not state that any HOCL LLC or EWCO product or its output is authorized for a particular restaurant use. Confirm authorization, directions, and local requirements before use.

The short answer

On-site hypochlorous acid (HOCl) generation can be part of a restaurant's cleaning program, but only for uses where the specific product and its output are authorized, under written directions you can follow and verify. Start with what you need it for, then confirm what's permitted. A direction that covers one use doesn't automatically cover another.

Where HOCl may fit, and what each use requires

Possible use What to confirm before use
Food-prep area surfaces that don't touch food (walls, shelving, equipment exteriors, floors) Written directions for that cleaning use, including concentration and contact time
Other hard surfaces Product authorization and directions for that surface
Food, produce, or surfaces that touch food Not covered. This article makes no claim for these uses.
Hands or skin Don't apply generator output to the body; use products made for hand cleaning

Workflow checklist: hard-surface cleaning

Use this only once you've confirmed the product's authorization and directions.

  1. Clean first. Remove visible soil with a detergent cleaner before you apply HOCl solution. Soil and organic matter use up free chlorine.
  2. Generate and test. Make solution per the manual, and test free available chlorine (FAC) and pH before use. Readings are approximate. Aim for the pH range in your manual, typically pH 5–6.
  3. Apply per directions. Use the concentration and contact time in the product's directions; keep the surface wet for the full contact time.
  4. Finish as directed (air-dry, wipe, or rinse).
  5. Record. Log date, time, location, FAC and pH readings, and initials.

Equipment and setup considerations

What HOCl doesn't replace

Mixing and storage

Never mix HOCl solution with ammonia, bleach, strong acids or other cleaners; doing so can release toxic chlorine gas. Add only the ingredients and amounts your manual specifies. If someone breathes in fumes or swallows solution, call Poison Help at 1-800-222-1222 (poisonhelp.hrsa.gov). That's different from preparing a batch with the ingredients a manufacturer specifies. Store and label solution per the manual, and test before use. See Does HOCl Expire? Eco One Storage, Containers and Testing.

Before you buy: a short checklist

Questions? Email service@hocl.com. See also On-Site HOCl Cost Worksheet for the EWCO 300.

The EWCO 300 makes up to 300 ppm on a continuous basis. For batch use, see the Hypo 7.5 or the Eco One.

Sources (accessed November 7, 2026)